Framing in District of Columbia

checkmark

• Quite Some Time

What we're about to tell you, even a lot of contractors who have been Framing homes for quite some time, might not be familiar with. Most home builders are interested in saving a few dollars, during every single phase of the construction project, but tend to forget, that they can save money, call an expert 844-244-6190 in District of Columbia.

checkmark

• Space Your Studs

You can frame your walls and space your studs at, 12 inches on center, 16 inches on center and 24 inches on center. But most people don't know that there's a mark on your tape measure that allows you to space wall studs, roof rafters and ceiling joist at 19 1/4 inch on center. Talk to us 844-244-6190.

checkmark

• Tape Measure

Here's what you need to do, grab your tape measure and open it up until you reach 19 1/4 inches and you will see a little diamond shaped mark that you can use when laying out your wall Framing or any other part of the home that you will be building.

The best way is to speak to a pro, 844-244-6190

Framing Contractor in District of Columbia

House Framing Guys explains the measurements will be located at 19 1/4 inches, 38 1/2 inches, 57 1/2 inches 76 3/4" and last but not least 96 inches. If laid out properly, you will be able to use eight-foot sheets of plywood and drywall, depending on which areas of the home you use for this specific Framing layout. Here's another professional Framing contractor tip that you should pay special attention to. You can't use these measurements on most structural sheer walls and you should check your structural Framing plans, to make sure that you're allowed to use them on to other sections of the home

Wall Framing Tips by a Framing Contractor

You are free to contact House Framing Guys Framing Contractor in District of Columbia to speak to a professional. House Framing Guys is working on the internet to promote the education for creating simple to follow guides and home building books to help all our clients understand what is required to perform this job and why you should phone a pro.

Plywood Roof Sheeting - Roof Framing Trade Secrets

House Framing Guys in District of Columbia Framing contractor's look at the building plans and order all of the material, corresponding to those that are specified on the plans. This works out fine, and can often save you money, but rarely produces the best home that you could possibly frame.

As a professional Framing contractor, House Framing Guys would like to share one of our house Framing tips with you. Most plans require half-inch plywood or oriented strand board as their roof sheeting. This product is fine and if you're building a lot of homes, you're not going to have the choice. Call now 844-244-6190.

However, if you’re Framing or building a home you might want to take our advice and think twice about it, before ordering the roof sheeting. Half-inch plywood, works okay for 16 inch on center roof rafters or engineered truss roofing systems. It doesn't work well on 24 inch on center roof rafters spacing.

Cities we serve

img Washington, DC

Key features

Framing in District of Columbia
Coverage for District of Columbia
Zip codes near District of Columbia


Click To Call

  • img Certified by Recycling Association
  • img High-end Work
  • img Professional and friendly staff
  • img Special Offers